|
|
Post by stevec47 on Dec 10, 2010 18:42:57 GMT
Hi
My friend has a 607 (05reg) & the boot won't open by using either the remote or the switch on the boot lid.
We have tried another remote but it still won't open.
Can anyone tell me if there is a fuse for the boot lid?
|
|
|
|
Post by Piston Broke on Dec 10, 2010 20:22:09 GMT
Yes, but I couldn't tell you offhand which one.
Are you hearing the boot lock servo trying to activate, or is it just totally dead/silent?
|
|
|
|
Post by stevec47 on Dec 10, 2010 21:37:30 GMT
I can't hear anything trying to work.
|
|
|
|
Post by oldpug on Dec 11, 2010 13:12:51 GMT
I had this and it was broken wires in the loom that run along the n/side hinge.The only way to open the boot is from the inside!!Pull down the back seat,crawl in with a torch and a small screwdriver.Have a look at the lock to find a small 3-4 mm hole, poke in the driver and it will release the lock and up pops the boot lid.It took me most of the day to find this out.There is no other way to open it manually,so check it all out before you shut the lid or you will end up like I was crawling in and out with a torch.Not one of Peugeot`s best ideas.
|
|
|
|
Post by frank on Dec 11, 2010 15:12:34 GMT
this also happens on the 407 saloons aswell!!
|
|
|
|
Post by stevec47 on Dec 11, 2010 22:18:08 GMT
Thanks for all your advice, Forums are a fantastic way of sharing information.
|
|
|
|
Post by Piston Broke on Dec 12, 2010 8:43:42 GMT
Failing the above, try this...
try re syncronising the key.
Switch ignition on with the key to be resync
press and hold lock button for 10seconds
switch off and remove key
wait 5 seconds
then lock and unlock
then try the boot
If that lot doesn't work, you may need a new striker. Reset the system by replacing the blown fuse and you can then open it to fit the new one, hopefully.
good luck.
|
|
|
|
Post by frank on Dec 13, 2010 14:33:51 GMT
Failing the above, try this...
try re syncronising the key.
Switch ignition on with the key to be resync
press and hold lock button for 10seconds
switch off and remove key
wait 5 seconds
then lock and unlock
then try the boot
If that lot doesn't work, you may need a new striker. Reset the system by replacing the blown fuse and you can then open it to fit the new one, hopefully.
good luck.
you what!!!! new striker hahahaha, whats that got to do with it??
|
|
|
|
Post by Piston Broke on Dec 14, 2010 10:00:38 GMT
Mentioned this to a contact, he'd found one on a 607 that had somehow bent and caused the same problem. Wouldn't respond to button or key. He'd also heard of catches failing and doing the same, but never dealt with one himself.
Probably clutching a straws after all the other good tips, but seeing as the guy asked for help I shan't apologise for emailing a pug tech for advise. A positive attitude, even if we can't help him, might generate another paying member for the club, so I would ask that such comments are worded more constructively, or else kept off the 07 forum altogether.
|
|
|
|
Post by oldpug on Dec 15, 2010 15:44:19 GMT
Woops! Happy Christmas Boys.
|
|
|
|
Post by Piston Broke on Dec 15, 2010 16:41:50 GMT
It'd be a happier Christmas if that tasty 405 wagon of yours were in my stocking!
No...? Dammit!
|
|
|
|
Post by frank on Dec 15, 2010 18:08:36 GMT
lol, ok im sorry. shouldnt of took the mickey, just that after reading somthing else on another forum, that was just absurd. i couldnt help but reply with that lol. sorry
|
|
|
|
Post by Piston Broke on Dec 15, 2010 18:32:31 GMT
No worries chum  And yeah, I can come out with some absurd tripe at the best of times! |
|
|
|
Post by frank on Dec 15, 2010 19:32:03 GMT
ok, hope the op replys with the repair method. then we can rest in piece  |
|
|
|
Post by bolade007 on Feb 19, 2011 22:19:27 GMT
I synchronized my keys and it worked .Thanks
MY 607 WON'T START.It rolls but won't start.I suddenly stopped,has never happened before now.What should i do?
|
|
