magic77
First past the post
Posts: 3
|
Post by magic77 on Feb 19, 2005 18:51:44 GMT
Hi new to here
Just had a new 407 HDI delivered but my trip computer and trip meter on the speedo are both in KM and have no idea how to change it to milage
Has anyoen got any idea how to
thanks
|
|
|
|
Post by 504V6Ti on Feb 19, 2005 19:55:48 GMT
Hmm, you've obviously not read your user manual yet! You should start there.
Your trip computer is simply set for Km/h as opposed to mph, that's all. All you need to do is set it to mph, just like you would set the language or the time&date of the computer. It is all explained in the manual...
|
|
magic77
First past the post
Posts: 3
|
Post by magic77 on Feb 21, 2005 15:55:35 GMT
I went through the manual twice and so did my friend neither could find it  |
|
|
|
Post by 504V6Ti on Feb 21, 2005 19:41:00 GMT
Ok, well I don't know how the system works on a 407, but here is how it works on a 406. The two systems aren't probably too dissimilar...
The multi-function display has 1 little button on both sides of the LCD screen. The one on the left is used to enter setup mode (by pressing and holding the button a couple of seconds) and then go through the various options available (by pressing the button shortly). The button on the right is used to change the value of the item selected by pressing the left button. Items you can change are language, time, date, distance & speed units (Km v Mls).
Failing that, you can always go back to the dealer who sold you the car. They are actually supposed to take any new buyer through a short induction on the equipment of the car.
I'm surprised there is no section of your manual that describes the operation of the trip computer.
|
|
magic77
First past the post
Posts: 3
|
Post by magic77 on Feb 22, 2005 10:51:53 GMT
thanks will look into it
|
|
alby666
First past the post
Posts: 1
|
Post by alby666 on Jun 28, 2005 9:05:22 GMT
Do you have the RT3 satnav system as I know you can change the settings for Miles/KM per h there!!
|
|
