|
Post by macpugmug on Apr 10, 2005 20:48:21 GMT
Haynes Manual not that clear! How do I get at the relays? What do I need to do to access the dip beam relays in particular? Side, and main beam work fine but dip is bad news?
|
|
Kitsune
Poster boy
Pugs N Dubs
Posts: 68
|
Post by Kitsune on Apr 11, 2005 15:32:35 GMT
If the relays you are referring to are the ones under the dash by the steering wheel, there should be some plastic screws that simply undo and the panel drops down. This is on my H plate 405 at least. Not sure how different 405's compare.
|
|
|
Post by PowerLee on Apr 11, 2005 16:53:53 GMT
Hi
You might find the relay you are after is in the engine bay.
Have a look under the plastic cover behind the bulkhead, Its where the outside air intake & pollen filter are.
Theres a few headlamp related relays clipped to the engine ECU, Im pretty sure your after a green one.
Ill have a look at mine later on if needed.
|
|