Post by 66rover99 on Apr 24, 2007 16:37:43 GMT
Hi,
I saved an XD3T from the scrap heap last year and it now lives in my 1966 Land Rover. However, in the process, I have mixed up several water hoses (not the big two
).
If anyone could tell me where the hose on the bottom of the overflow tank plugs into the engine, that would be appreciated.
As well, I currently have the hose on the right rear of the head, and the left rear of the block (lower) going to the heater core.
And, finally, I have the hose outlet at the left rear of the head and from the bypass of the waterpump connected to the fuel filter heater.
Can someone take a look under their hood and see if I have anything mixed up? If I recall correctly there was one more set of small hoses going to a cold start circuit on the injector pump. this has been removed.
thanks, Dave
----
1966 XD3T powered Land Rover 88"
I saved an XD3T from the scrap heap last year and it now lives in my 1966 Land Rover. However, in the process, I have mixed up several water hoses (not the big two
).If anyone could tell me where the hose on the bottom of the overflow tank plugs into the engine, that would be appreciated.
As well, I currently have the hose on the right rear of the head, and the left rear of the block (lower) going to the heater core.
And, finally, I have the hose outlet at the left rear of the head and from the bypass of the waterpump connected to the fuel filter heater.
Can someone take a look under their hood and see if I have anything mixed up? If I recall correctly there was one more set of small hoses going to a cold start circuit on the injector pump. this has been removed.
thanks, Dave
----
1966 XD3T powered Land Rover 88"