|
|
Post by heavyoils on Jan 29, 2006 22:01:36 GMT
ok this is what is happening I turn on heater slightly warm air for 30 seconds then it cools off,cable is ok for hot / cold air,any ideas .........coolant bleed maybe? thanks
|
|
|
|
Post by 504gld on Feb 11, 2006 18:31:50 GMT
Sounds like an air lock, which you will need to fix as soon as possible or localised overheating might occur. It is necessary to fit a header bottle to the expansion tank, held up high. A 2 litre pop bottle can be used with the bottom cut off, and rubber hose fitted on the end, and too the expansion tank. It needs to be tied up to the top of the open bonnet. The engine needs to be run at fast tick over for about 15 minutes like this, you should get the air out. Also check the bleed screws on the pipe work at the same time.
|
|
