|
|
Post by gair2038 on Apr 4, 2007 21:50:10 GMT
My 406 V6 has just had the front brakes done, i now get vibration from the pedal. any one any ideas? My hand brake is in need of adustment could this be the cause?
|
|
|
|
Post by chompy on Apr 5, 2007 17:30:30 GMT
its possibly wheel bearings, or warped disks, or somthing not been put on right, doubt that would cause the pedal to vibrate.
|
|
|
|
Post by 504V6Ti on Apr 5, 2007 20:22:30 GMT
Handbrake is on the rear wheels and vibrations felt at the pedal will come from the front brakes. I'm not sure about the saloon/estate, but some models of 406Coupé V6 (can't remember the years) have a known problem with front discs getting warped. I suffered from it on my 2006 210bhp V6 Coupé and had to get new discs a few months ago. This problem affects 406s with Brembo calipers.
|
|
|
|
Post by gair2038 on Apr 6, 2007 21:03:50 GMT
would discs warp after only a couple of months?
|
|
|
|
Post by frank on Apr 6, 2007 22:33:59 GMT
depends on if they where geuine peugeot discs or cheap copys, also on how its driven.
|
|
