|
Post by delmonte251 on Jun 22, 2008 13:02:09 GMT
Hi there, it seems quite a few people are having this issue. Mine was working, then stopped, started again and is now totally dead. The air con compressor kicks in when the button is pressed but just the blower seems to have stopped working. I've checked the fuses. Any help would be greatly appreciated.
|
|
|
Post by 406taxi on Jun 25, 2011 3:51:29 GMT
hi, i ended up buying a new motor for mine. sometimes it worked, sometimes not. i took the motor out of it's housing, still connected, and it seemed that if it stopped in a certain position, it needed a push by hand to work.
|
|
|
Post by Piston Broke on Jun 25, 2011 10:45:32 GMT
Does yours have the manual 'dial' controls, or the posher digital controls?
|
|
plod
First past the post
Posts: 3
|
Post by plod on Dec 3, 2011 17:15:16 GMT
I had issues with my blowers
I followed along the wiring from the blower and about 6"'s down was a white plug This plug was shorting out, and initially I replaced the plug with some heavy duty spade connectors After a while the blower started playing up again, and I bought a 50amp Anderson connector off the bay for about £6 and since fitting, I've not had any issues again.
|
|