kevh
Poster boy
Posts: 40
|
Post by kevh on Apr 19, 2009 16:33:16 GMT
not sure if my clutch is on way out or synchromech
changing from 3rd to 2nd gear crunches sometimes from 3rd to 4th unless i change gear very slowly any advise please.
kev
|
|
|
|
Post by frank on Apr 19, 2009 18:32:32 GMT
what car is it?
|
|
kevh
Poster boy
Posts: 40
|
Post by kevh on Apr 20, 2009 16:59:07 GMT
Sorry
its a 407sw 136bhp 2.0 hdi 85000 miles.
kev
|
|
|
|
Post by frank on Apr 20, 2009 17:45:08 GMT
could be the clutch but they went very early on these as they had a problem, very had a syncromesh go on one either but theres always a first time. best bet is to get it roadtested by a gearbox specialist
|
|
kevh
Poster boy
Posts: 40
|
Post by kevh on May 3, 2009 9:48:49 GMT
I bled the clutch today seems to have done the trick, has the clutch got its own fluid reservoir or does it share the brake. i want to give it a complete fluid change but cant find fluid reservoir?
kev
|
|
|
|
Post by frank on May 3, 2009 16:13:38 GMT
it shares the same reservoir as the brake
|
|
kevh
Poster boy
Posts: 40
|
Post by kevh on May 3, 2009 18:04:52 GMT
Thanks for the reply Frank fix was short lived only lasted a few miles then back to how it was, now not sure what the problem is.  kev |
|
|
|
Post by Piston Broke on May 9, 2009 10:52:31 GMT
Sounds like a dicky clutch slave cylinder.
|
|
kevh
Poster boy
Posts: 40
|
Post by kevh on May 13, 2009 21:43:20 GMT
Replace slave cylinder made no difference  |
|
|
|
Post by frank on May 13, 2009 22:50:02 GMT
be the clutch, but like i said get a specialist to roadtest it before wasting anymore cash
|
|
kevh
Poster boy
Posts: 40
|
Post by kevh on May 19, 2009 21:52:22 GMT
went to a couple of clutch centres today both have said its the gearbox how do i find out what gearbox i have i.e gearbox code? Kev |
|
