|
|
Post by 406ric on May 21, 2009 8:58:05 GMT
After using the indicators I hear a series of random clicks from the flasher unit even though the indicators have been turned off! The direction lights on the dash don't flash so I'm assuming the indicators themselves aren't flashing too (I think other drivers would have warned me if they were going berserk). Any ideas as to why? Do I need a new flasher unit? Cheers.
|
|
|
|
Post by frank on May 21, 2009 18:40:23 GMT
what car is it on??
|
|
|
|
Post by 406ric on May 22, 2009 8:25:18 GMT
Oh sorry - it's a '98 406 TD estate!!
|
|
|
|
Post by frank on May 22, 2009 13:46:45 GMT
the fault with it is easy to diagnose, if you lightly tap the switch does the relay click then?  if so its the switch. really comon on these |
|
|
|
Post by Leopold on Aug 29, 2009 10:40:36 GMT
Yeah, i had the same problem on my 106.. It was very annoying to say the least. I replaced the relay, no good. And was later told that it was the Indicator Stalk as this is quite common to go and i replaced that, and wahey it didnt do it again...  |
|
if so its the switch. 
