605 rear brakes

[alanism]

Hi all,

Ive just acquired a 605 and it is great. That is until MOT time and I looked at the brakes at the rear end. Does anybody have any idea how these go together?

I think the drums inboard are OK and they seem to be held on with a huge nut. I'm getting confused and there is no documentation for this I can find.

Is it the same as an XM?

Thankyou

Alan

[oldpug]

With the caliper off,the disc/drum (one unit) will come off after removing two small screws,just like most front discs.It will be rusty and will need a bit of a whack.Also I bet the pins that hold the rear pads inplace will be siezed in the caliper.

[alanism]

Cheers oldpug...

I think that was where I was stuck.. it appears nicely ceased together... Ill go wild with a can of lubricant and relace all the pads etc.


Alan

[alanism]

I apologise for not updating but the old 605 is now on the road doing 150 mile a day in comfort. few little faults to sort (leak from heater matrix) and trying to get remote locking working.

Thanks for the help and merry christmas!

Alan