|
Post by jackson55 on Nov 16, 2009 12:49:48 GMT
Hi My 1st post here. I have a 405 petrol 1995 with air con . The heater seems to be stuck on cold. Fan working fine, air cons not on . Heater matrix is hot but no hot air from vents . The switch's are working fine theres an power out put from the hot cold switch. But to where does this go Hoping someone can help before i get to deep in taking the heater box out or most of the dash. ( as peug dealer said ) ... many thanks karl
|
|
|
Post by oldpug on Nov 16, 2009 19:21:18 GMT
Check the heater flap motor?Its a pig to get at,a small box on the O/S of the heater.Pull the covers off and get your head by the clutch pedal!With the ignition on get someone to work the lever hot to cold,I bet it does not move.
|
|
|
Post by jackson55 on Nov 16, 2009 20:29:16 GMT
cheers oldpug. Thats what i was looking for but could not find it.
I did find it in the end and its not working ;-).. new one on order. will keep you posted
cheers
|
|
|
Post by oldpug on Nov 19, 2009 19:03:12 GMT
Its only two PK screws but be very carefull locating the new one.Have a close look at it when removed and you will see what I mean.It has a sort of master spline,is difficult to locate,all plastic so never force it.I plug it in then "play" with the controls untill it lines up.
|
|
|
Post by jackson55 on Nov 30, 2009 18:48:48 GMT
Sorry for delay . been away ;-) All done no probs The wire had come off the motor in side the unit .
cheers
|
|