|
|
Post by 405stdt on Dec 7, 2009 14:47:50 GMT
Would a brake servo from any other Peugeot / Citroen / Renault fit a 1993 405 Mi16?
I'm having great difficulty finding a replacement.
|
|
|
|
Post by oldpug on Dec 7, 2009 19:10:31 GMT
I`m sure its a 405 only job and I think all 405 servo`s are the same.
|
|
|
|
Post by 405stdt on Dec 8, 2009 9:17:57 GMT
Is there no difference in size between ABS and non-ABS cars?
All Mi16s were fitted with servo-assisted ABS brakes weren't they?
|
|
|
|
Post by oldpug on Dec 9, 2009 18:56:42 GMT
The only way to be sure is ask a Dealer parts dept.All MI16`s had ABS and I`m sure that if you get a servo from any 405 with disc`s all round it will fit and be OK.By the way 405 servo`s never go wronge,I think I`ve replaced one in the last 20yrs!are you sure you need one?
|
|
|
|
Post by 405stdt on Dec 16, 2009 13:37:58 GMT
oldpug:
The servo is for a car I may potentially buy. It definitely needs a new one as the old one has got a rust hole in it underneath.
From the looks of it it has rusted due to wet leaf mulch build up around it.
|
|
|
|
Post by oldpug on Dec 16, 2009 19:17:35 GMT
The leaves must have been there for years!Give it a good clean out and make sure the body has not got rusty holes.I expect the drain holes both sides are blocked up.Have a look at the other side to see if the ECU`s are dry.I`ve seen them under water due to blocked drain holes,what a stupid place to fit them!
|
|
