|
Post by bubsdturbo on Jan 30, 2011 0:33:26 GMT
hey every one newbie here, i have a 1997 pug 306 d turbo im having some problems with my front windows. the passenger window wont stay up and it seems there is a green plastic block that attaches the window to the runner is broken can this be replaced or do i need to replace the full window mechanisim? the drivers window is dropping at the wing mirror end and i can figure out what is broken! i really miss being able to let some fresh air in can anyone help?!
|
|
|
Post by bubsdturbo on Jan 30, 2011 12:57:59 GMT
anyone please!?
|
|
|
Post by oldpug on Jan 30, 2011 17:05:52 GMT
You have to replace the whole motor/rack assembly!!yes,just for a bit of plastic,GSF or EURO will supply good quality ones for a lot less than a Dealer.As for the driver`s window,have a look at the side the glass that comes out from the runner and you will find a small hole in the glass?then go down the runner and you will find a small plastic clip that should be attached to the window whar slotted in the runner. Look at it and you will figure out how its works.They often pop out so in the past I have super glued the clip to the glass.
|
|