kang
First past the post
Posts: 5
|
Post by kang on Mar 7, 2011 9:12:36 GMT
Hi all I have a 2000 406 with a heater blower problem, sometimes it will work fully with no problems (full control/speed hot air etc) but the next time you start up it wont work at all. I've found restarting the engine a couple of times will often 'trick' it into working. All the dash controls appear to be doing their job Any help would be much appreciated
|
|
|
Post by shonkers on May 17, 2011 20:36:54 GMT
hi i had exactly the same problem with my 406 2.1 td 96 model its where the connector fits into the blower unit underneath i took blower out pretty easy then you have to seperate the fan from the unit i got someone to hold unit while i prised out fan then you can solder the spade connector i think it happens when passengers get in and kick the unit mine ran fine for months but has gone again maybe i should just get a new one good luck
|
|
|
Post by 406taxi on Jun 25, 2011 3:59:27 GMT
hi, my 285k 406 had the same problem. ended up replacing the fan motor itself.
|
|