|
Post by sharpzippy on Oct 23, 2005 22:22:50 GMT
Hi there everyone,
Can anybody help me out please i have an 806 diesel 95(n) not Hdi, has been fine until today got in turned key, ignition lights came on, but now glow plug light, was turning over fine but wouldn't fire, check what fuses i could see... but to no joy can anybody point me in the right direction, and info would be greatly appreciated.
Thank you
|
|
|
Post by andy504 on Oct 24, 2005 7:21:56 GMT
Hi, if all your fuses turn out to be ok (engine compatment and interior) there's a fair chance it's the conector between the main harness and the engine harness. It's a brown 23pin conector behind the air filter/ engine fuse box. They tend to get a bit water damaged (green and furry)
regards andy
|
|