|
Post by rattigan405 on Nov 29, 2005 16:04:48 GMT
Can anyone help me on this. The heater in my 405 only blows out cold air, even when the engine is warmed fully. I've taken off the trim panels under the glovebox and at the side of the centre console and there's a white cable with a round 6 pin plug sticking out, is this the aerial wire or something to do with the heater? Thanks for any help you can give, I'm freezing my backside off in this car
|
|
|
Post by rattigan405 on Nov 30, 2005 21:38:47 GMT
Well I decided to flush the rad through and took off the bottom hose, the bit thats supposed to twist and click, trouble is, it twisted then snapped So off to Peugeot and now I'm £21 down for a new hose. dont you just love Pug and their plastic parts!
|
|
|
Post by Admin on Nov 30, 2005 22:02:18 GMT
freezing cold weather, plastic parts... it can only go one way. Try taking a bucket of warm water out with you and a rag, use the water to warm up the plastic, then it should become more flexible and not snap!
|
|
|
Post by rattigan405 on Dec 1, 2005 5:26:40 GMT
Thanks for that. I'll make sure I do that with the new hose ;D
|
|